COMETECH QC-548M2F Máy kiểm tra độ bền kéo (nén) được điều khiển bằng máy tính
Confirm to ISO 7500-1, ASTM E4, ASTM D-76, DIN5122, JIS B7721/B7733, EN 1002-2, BS1610, GB T228 Standard
QC-548M2F table type machine has capacity up to 5kN. It offers a quiet testing environment and accurate test result. On stand-alone mode, it can do tensile test, compression test, bending test and so on. Transmission system needs little maintenance even after being used for a while. The machine has a separate electricity control that avoids interference with other transmission components for a higher testing stability. Upgrading of the controller system is also easily practicable.The precise hand wheel controls grip’s movement at a small scale. With this tool, users can move the grip to a precise position. The force signal is emitted and received instantly so as to prevent overload. A port is reserved for signals that are outside the machine for a more flexible operation.
Industry:Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electron, Package, Medical, Construction
| Model | QC-548M2F-S | QC-548M2F-M |
|---|---|---|
| Max. Capacity | 5 kN | |
| Units |
Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg |
|
| Force Resolution | 31 bits | |
| Force Precision | 1/100,000 | |
| Test Stroke(w/o grip) | 400 mm | 800 mm |
| Stroke Resolution | 0.0001 mm | |
| Speed Range |
Low Speed Mode : 0.0005~9mm/min High Speed Mode : 0.5~3000mm/min |
|
| Speed Accuracy | Lower 1% | |
| Data Sampling Rate | Max.1200Hz | |
| Space Between Columns | 80 mm | |
| PC-Port | RJ45(TCP/IP) | |
| Motor Type | Servo Motor | |
| Rigidity | 4.1 kN/mm (Vertical Rigidity) | |
| Hardware protection | Upper/lower limits, emergency stop button | |
| Power Supply | Single Phase, 200 ~ 240VAC，5A | |
| Dimension | ||
| Weight | 65 kgf | 80 kgf |
Cần thêm thông tin hoặc tư vấn kỹ thuật?
Nếu Quý khách cần thêm thông tin chi tiết về sản phẩm, thông số kỹ thuật, ứng dụng thực tế hoặc yêu cầu mẫu thử, đội ngũ của chúng tôi luôn sẵn sàng hỗ trợ.
📞 Điện thoại: (024) 6687 2330
📧 Email: sale@pemax-mte.com
Hoặc gửi yêu cầu qua biểu mẫu liên hệ hoặc trao đổi trực tiếp qua hộp chat ở góc phải màn hình.