Hệ thống thử rơi va đập SM12-100 SM12-200 SM12-300 Small Drop Test System

Small Drop Test System is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on， applicable standards JISC 0044 and IEC 60068-2-32. Through standard tests on electronic products (surface drop, corner drop, edge drop, etc.) and collecting data, it simulates the vertical drop impact of electronic products during transportation and handling. It provides a basis for the design of the product's buffer and vibration damping and the selection of structural materials.

It can be dropped naked or dropped with packaging to evaluate the impact resistance or the damage caused by the fall of the product during transportation. It is an indispensable test method to improve the product's quality. It is applicable for electronic product research, development, quality control, manufacturing and other links.

Features:

• Upper and lower displacement limit to guarantee safe.

• The lifting height can be adjusted arbitrarily to meet the different requirements.

• It can clamp and drop the test sample at any angle

• Just place the machine on a flat marble or concrete floor, no special foundation needed

• Remote control can be realized to ensure the safety of operators. (custom function)

• Operating environment: temperature 0 ～ 40 ℃, humidity ≤80% (non-condensing)

• Power supply: 2-phase AC220V 50Hz.

Model	SM12－100	SM12－200	SM12－300
Parameters
Max. Load (kg)	100	200	300
Drop Height (mm)	0～1200	0～1200	0～1200
Max. Specimen Size  (mm)	1000×1000×1000	1200×1200×1200	1300×1300×1300
Single Lift Drop   Zone Size （W*D/mm）	1000×1200	1000×1200	1000×1200
Double lift Drop   Zone Size（W*D/mm）	1700×1400	1700×1400	1900×1600
Test Mode	Face, Edge and Angle
Overall Dimension  (mm)	2000×1200×2000	2100×1200×2200	2200×1200×2300
Double lift Overall Dimension (mm)	2050×1400×1615	2050×1400×1615	2250×1600×1615
Weight (kg)	1700	1800	2000
Consumption Power  (kVA)	1.5	2	3
Power Supply   for Tester	AC220V±10%，50Hz
Power Supply   for Air Source	AC220V±10%，50Hz，3kVA /AC380V±10%, 50Hz，5kVA
Air Source Conditions	The output pressure is no greater than 1.0MPa, and air compressor is needed to be configured if there is no air source in the lab.
Working Environment	Temperature range 0～40℃，humidity≤80% (no condense)
Standards	ISO2248-1985 (E)     IEC68-2-27